Gatco 1439C-Premier Accordion Mirror in Chrome Manuel d'utilisateur télécharger pdf

PREPARATION

Tools Required for Assembly: (Not included)

• Electrical drill with 5/16 in. drill bit

• Mallet hammer

CAUTION: Drywall anchors are for drywalls only. Use tile anchors for tile surfaces. (included)

INSTALLATION INSTRUCTIONS

Hold the accordion mirror (A) up against desired position on wall, and

mark the position of screw holes. (B) Remove the item. (Fig. 1)

2. Drill 5/16 in. pilot holes into the wall where the drywall anchors (C)

will be inserted.

4. Pinch drywall anchors (C) two wings together (Fig. 2), and insert it into the

hole. Tap flush with the wall using a mallet hammer.

5. Insert the red push pin (D) into the drywall anchors (C)

until the wings pop open. (Fig. 3) Then remove the pin.

Do not tap the red push pin with a hammer.

6. Place the swing mirror (A) over the drywall anchors (D).

Insert mounting screws (E) through the bracket and anchors,

and then tighten firmly with Phillips head screwdriver. (Fig. 4)

CARE AND MAINTENANCE

To maintain the beautiful luster finish, please use soft damp cloths when

cleaning and never use any cleaning solvents.

• Phillips head screwdriver

• Safety glasses

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Side View

a. b. c.

a. b.

GENERAL INSTALLATION INSTRUCTIONS

Premier Accordion Mirror | 1439C, 1439SN (Drywall installation)

Top View

Push

PREPARATION Tools Required for Assembly: (Not included) • Electrical drill with 5/16 in. drill bit • Mallet hammer CAUTION: Dry

Pas de commentaire

Gatco 1439C-Premier Accordion Mirror in Chrome Manuel d'utilisateur